Product Details
＋Puff Patterned Heat Transfer Vinyl
Printed on * Provided
*Some Patterns are not available in multiple scales.
*Some Patterns are not seamless on a continuous roll.
*Some Patterns are not available in multiple scales.
*Some Patterns are not seamless on a continuous roll.
• HTV4U Patterned Heat Transfer Vinyl is the perfect media for your needs!
• Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply
TTD Easy Mask to transfer design off of the backing and place on your garment face up.
• We have a tons of variety and colors for you to choose from!
• Quantity discounts available!
• Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply
TTD Easy Mask to transfer design off of the backing and place on your garment face up.
• We have a tons of variety and colors for you to choose from!
• Quantity discounts available!
*This product is excluded from all promotional discounts and offers.
| ORDER DESCRIPTION |
| CUTTER SETTINGS | |||
| Cricut: Blade: Standard Setting: Iron On | Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6 | Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 | |
| Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: 250 Speed: 25-50 cm/s | Graphtec: Blade: 45° Gram Force: 9 Tool: CB09U 0 Speed: 25 cm/s | MH, SC2, LP3, & Titan 1: Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing Varies | Titan 2 & 3 Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies |
| Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. | |||
| APPLICATION INSTRUCTIONS | |
| Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-12 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier hot | Application Instructions (heat press) *Please consider that puff vinyl colors will turn lighter after puffed. |
| RECOMMENDED ACCESSORIES & CARE | |||
| Patterned Vinyls Apply to: 100% cotton Poly/cotton blends 100% polyester Leather Lycra®/spandex | Recommended Accessories: | Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean Do not bleach | |
| CUSTOM PATTERNS AND DESIGNS |
| Have your own patterns you want to print? Send us an email! [email protected] |
