• Our smallest highest precision cutting length FlexLED ever. 
• Only 5MM wide and 11MM (0.43") cut points! 
• Industry Standard 2700k, 4100k, and 5600k
• High CRI & TLCI over >97
• 180 LED/Meter Flex LED Tape in 24V DC (5 meter lengths)

The 180 LED/meter is extremely high density and narrow width at only 5MM.  It is ideally suited for areas where high output in a very tight space is required. With a cut point of 11M (0.43") this is LED can get your installation to the closest precise cut-point required. If that weren't enough, this new chip technology is our best full-spectrum white LED ever created. This LED is near-perfect colour rendering with a typical CRI at 98 and TLCI at 99 requiring no post colour correction. This LED is high efficiency at over 100 lumen/watt and produces vibrant colours for the eye and the camera.

Suitable for on-camera use, or anywhere a high-quality white light is required.
Soldering Guidelines:
Soldering iron should be between 360°C and 372°C.  Please ensure not to heat each solder pad for longer than 3 seconds otherwise separation of the solder pads can occur.

Indoor and weatherproof strips have 3M double-sided tape on the back which makes installation as easy as peel n stick. 

Waterproof must be mounted using silicone glue or similar.
Controller, power supply and extension cables sold separately
Quantity discounts and custom color temperatures available.

Please call 1.800.924.1585 or email [email protected] to inquire.

Pricing is for 5 meters (16.4')

SPECIFICATIONS - INDOOR PRODUCT

DOWNLOADS

*nominal lifetime - dependent on installation location